TECHNICAL DATA SHEET ULTIMATE WATERPROOFER
Specifically, this Liquid Waterproofer uses MS hybrid polymer technology to create the perfect waterproof anti-slip membrane, with immediate waterproof effects! This versatile product can be used to repair roofs, around chimneys, roof domes and gutter sealing and can also be applied to prevent the rotting of wood and corrosion of metals. Additionally, it can be used to seal fixings, floors, walls, wood and plasterboards and shower trays as well. Create the perfect waterproof membrane for all kinds of waterproofing repairs.
- Highly elastic
- Gap filling properties
- Sachet sealed for longer shelf-life and optimum performance
- Immediate waterproof membrane
- No need to mix as it is ready to use
- Easy to apply with either brush or roller
- Fast curing
- Durable, UV and weather-resistant
- Can be used in damp or dry conditions and on damp surfaces
- Odourless and very low emissions
- Anti-slip membrane
- Can be used as a tile adhesive and to seal concrete foundations
- No silicone, isocyanates or bitumen
- Also available in grey
High-performance premium trade products from HB42 are ones to rely on. Having undergone extensive market research into the latest technologies to make their products high-end, and only manufactured from the highest quality materials used, the products are sure to offer reliable service. All products meet the exacting standards of the construction industry in performance and strength as well as in health and safety.
Further information stated below
The substrate should be solid and free from loose materials, sharp parts, dust, gravel rests and dust.
Substrates such as steel, glass, aluminium, zinc and polyester should be degreased first.
Remove any water, water film or raindrops. The best adhesion is obtained on a dry surface, however the surface does not have to be completely dry. HB42 Ultimate Waterproofer also adheres to slightly damp surfaces (except on stone and substrates: these surfaces must be completely dry before application).
For open cracks, joints and raised edges, fibreglass jointing tape may be used. After a first layer of HB42 Waterproofer is applied, the fibreglass tape can be pressed into the wet product. Afterwards a second layer of HB42 Waterproofer is applied on top.
Apply HB42 Waterproofer directly from the bucket in one layer of minimum 1 mm thickness with a short haired brush or velvet roller for an optimal resistance against water and UV. Apply vertical sides in multiple layers with a drying time of 4 to 6 hours between two layers.
Indicated applications for 1 mm of layer thickness: anti-slip membrane, anti-corrosion layer, protection against rotting of wood.
Indicated applications for 2 mm of layer thickness: waterproofing, roof protection and cracks.
Fresh uncured HB42 Waterproofer can be removed with HB42 Solvent Cleaner. Cured material can only be removed mechanically.
HB42 Ultimate Waterproofer
Not suitable for PP, PE, PC, PMMA, and natural stone. Not suitable for fish ponds and drinking water reservoirs. Not suitable for expansion joints. Contact with bituminous substrates may cause discoloration and/or detachment.
There are currently no reviews for this product. Be the first to write a review
All prices on our website include V.A.T. (20%), unless stated otherwise.
Company registration number 04385962 registered office is Unit 1 33 Parker Drive, Leicester, LE4 0JP | Email: email@example.com
Web Design New Time Media