Weld On 725 Wet R Dry PVC-U Pipe Cement Clear 500g

⛟48 hour delivery available on this item

Applicable for wet conditions including plumbing, pools, spas and PVC-U plastic, Weld On's 725 WET R DRY PVC-U Pipe Cement creates the best waterproof seals. With low VOC and a fast setting, you can trust to form strong and airtight bonds.
Features:
- Clear in colour
- Extremely fast setting
- Premium formula
- For wet conditions, including swimming pools and spas
- Quick pressurisation
- For PVC-U pipe sizes of up to 6"/160mm diameter
- For SCH80, PN10 and PN16 pipe sizes of up to 4"/110m diameter
- For use on PVC-U and ABS pool and spa systems up to 2"/63mm diameter
- Gross weight: 500g
- Ultra low VOC
- Made in USA
- WRAS approved
- Certified to EN 14814 and EN 14680 standards

Was: £38.00

Now:

£25.01

Quick Reference: 10175

Installation

Technical

DIRECTIONS FOR USE:

1) Cut pipe square, chamfer outer edge 10-22Â° and deburr. Clean and dry jointing surfaces with Weld-On C-65 plastic pipe cleaner

2) IMPORTANT: check dry fit - a tight interference fit is essential if quick pressurisation is required

3) Working quickly, apply a full and even coat of cement to pipe. Thereafter a thin and even coat to the inside of the fitting

*** Avoid excessive use of cement resulting in puddling ***

4) While cement is wet, immediately push the pipe and fitting together. Hold joint together for at least 30 seconds to avoid pushout

5) Allow a few minutes before applying pressure. Full joint strength will be reached in 4 hours (allow a longer cure time for temperatures below 5Â°C)

Replace lid after use and use within the first 4 years of date on base of can. Store between 4Â°C and 43Â°C

Weld On 725 Wet R Dry PVC-U Pipe Cement Clear 500g

Baker & Soars+

Bathrooms+

Heating+

Plumbing+

Kitchens+

Spares+